Voltage Sub-Register Commands; Current Sub-Register Commands - Xantrex GPIB-M-HPD Operating Manual

Status Registers
Status Register Commands
Voltage
Query Voltage Sub-Register Condition
Sub-Register
STAT[<channel>]:QUES:VOLT:COND?
Commands
Query Voltage Sub-Register Event
STAT[<channel>]:QUES:VOLT[:EVEN]?
Enable Voltage Sub-Register
STAT[<channel>]:QUES:VOLT:ENAB <status-enable>
Set Voltage Positive Transition Filter
STAT[<channel>]:QUES:VOLT:PTR <status-enable>
Set Voltage Negative Transition Filter
STAT[<channel>]:QUES:VOLT:NTR <status-enable>
Current
Query Current Sub-Register Condition
Sub-Register
STAT[<channel>]:QUES:CURR:COND?
Commands
Query Current Sub-Register Event
STAT[<channel>]:QUES:CURR[:EVEN]?
Enable Current Sub-Register
STAT[<channel>]:QUES:CURR:ENAB <status-enable>
Set Current Positive Transition Filter
STAT[<channel>]:QUES:CURR:PTR <status-enable>
Set Current Negative Transition Filter
STAT[<channel>]:QUES:CURR:NTR <status-enable>
88
Operating Manual for Multichannel Functionality (GPIB-M)