Regulating Sub-Register; Table 4.1 Operation Status Register; Table 4.2 Regulating Sub-Register - Xantrex GPIB-M-HPD Operating Manual

Status Registers
Overview

Table 4.1 OPERation Status Register

Bit
REGulating This describes the regulating mode. If none of these bits is active, the output
unregulated (UNRegulated) bit is active in the questionable status register.
Sub-Register

Table 4.2 REGulating Sub-Register

Bit
72
Bit Weight Bit Name
0 1 CALibrating
1 2 Reserved
2 4 Reserved
3 8 Reserved
4 16 Reserved
5 32 Waiting for TRIGger
Summary
6 64 Reserved
7 128 Reserved
8 256 REGulating Summary
9 512 SHUTdown Summary
10 1024 Remote CONtrol
Summary
11 2048 Current SHareSummary
12 4096 Not Used
13 8192 Reserved
14 16384 PROGram Running
15 32768 Not Used
Bit Weight Bit Name
0 1
1 2
Description
CV The power supply is regulating in Constant
Voltage mode.
CC The power supply is regulating in Constant
Current mode.
Operating Manual for Multichannel Functionality (GPIB-M)
Description
Indicates that the supply is in
CALibration Mode.
Not implemented
Not implemented
Not implemented
Not implemented
Indicates if the supply is waiting
for a TRIGger.
Not implemented
Not implemented
Reflects the summary of the

REGulating Sub-Register.

Reflects the summary of the
SHUTdown Sub-Register.
Reflects the summary of the
Remote CONtrol Sub-Register.
Reflects the summary of the
Current Share Sub-Register.
Not used
Not implemented
Indicates that an Automated
Sequence is running.
Not used