Appendix B. Scpi Command Reference; Overview; Codes And Standards; Ieee 488.2 Requirements - Xantrex GPIB-M-HPD Operating Manual

Appendix B. SCPI Command Reference

Overview

This appendix provides a summary of the Standard Commands for Programmable
Instruments (SCPI) that are supported by the this Programmable Interface Card.

Codes and Standards

This power supply conforms to the following international standards:
•
•
•
IEEE 488.2 GPIB control implements all IEEE 488.2 requirements. See
for details.
Requirements
SCPI The power supply implements the following in order to meet SCPI requirements:
Requirements
•
•
•
•
•
Release 2.1
IEEE Std 488.2-1992 "IEEE Standard Codes, Formats, Protocols, and Common
Commands For Use With IEEE Std 488.1-1987"
IEEE Std 488.1-1987 "IEEE Standard Digital Interface for Programmable
Instrumentation"
Standard Commands for Programmable Instruments (SCPI) Version 1997.0
SCPI mandated commands
Questionable Status Register (QSR), Condition, Event, Enable
Operation Status Register (OSR), Condition, Event, Enable
Status Byte Register (SBR)
Standard Event Status Register (SESR)
Appendix A. "GPIB"
97