Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 94

Initial System Administration
The system responds with the Administration Log screen.
Leave the Start Date, Time, and Type fields on page 1 blank to display all
log entries. Press
page 2 of the screen.
4. Check the log for entries that indicate the Switch Names audit found one
or more non-unique subscriber names.
If the Switch Names audit finds a non-unique subscriber name the
DEFINITY AUDIX system will answer in stand-alone mode for that
subscriber (requiring the caller to reenter the subscriber's extension). In
addition, each time the Switch Names audit runs (at least nightly), it will
write an entry in the Administration log for each non-unique subscriber
name, which can quickly fill up the log file.
If the Switch Names audit finds 50 or more non-unique subscriber names,
the entire switch names database is discarded and the DEFINITY AUDIX
system will answer in stand-alone mode for all subscribers. This condition
is indicated by an entry in the Administration log.
For a description of the restrictions on subscriber names, see the section
Restrictions On Switch Translations in Chapter 3 of Switch Administration
for the DEFINITY AUDIX System , 585-300-509.
3-36
Issue 2 December 1996
(F3) to display the administration-log entries on
ENTER