Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 56

Hardware Installation
3. Verify that the DEFINITY AUDIX system hardware and software
components are installed properly. (If you have installed more than one
terminal, you can use either one for the remainder of this task.) At the
DEFINITY AUDIX system command line, enter list configuration. The
system responds with the List Configuration screen. The following screen
shows sample locations, board codes and vintages.
NOTE:
The location field will initially display "1a01" for component types
ALARM_BD, MFB_BD, DISK, and TAPE since they have not yet been
administered. Ignore this field.
2-34
Issue 2 December 1996