Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 138

Upgrades to R3.2
For others:
Upgrading subscriber profile database to R3.2 ... completed.
Upgrading message header database to R3.2.. completed.
Upgrading voice count database to R3.2 ... completed.
Upgrading mailbox database to R3.2 ...completed
Upgrading mailing list database to R3.2 ...completed
Upgrading traffic load day database to R3.2 ...completed
Upgrading traffic load hour database to R3.2 ...completed
Upgrading subscriber profile database to R3.2 ...completed
Upgrading traffic database to R3.2 ...completed
restore weekly from tape
restore voice from tape
Checking disk hours
Checking transfer type
No customized announcements found
Standard announcements will now be replaced.
The announcements tape must be inserted
18. Insert announcements tape. Press
tape LED on the tape drive goes out, press
Reading announcements ............................. completed.
Upgrade from the program tape is complete.
Proceeding with initialization.
If the upgrade is performed in a time zone different from that set on
the upgrade tape, the following actions must take place. Otherwise, skip
to the script where noted.
Reboot to pick up correct time zone.
Change to state 2 has been completed.
DEFINITY(R) AUDIX (R) System
- initializing from boot Fri Jan 06 12:53:14 EST 1995
No Install errors found
System name: audix
login: DEFINITY(R) AUDIX (R) System
- initializing to AUDIX state Jan 06 16:45:00 EST 1995
Phase 1 file check PASSED
Phase 2 file check PASSED
Phase 3 file check PASSED
Phase 4 file check PASSED
Phase 5 file check PASSED
DOTRACE=yesD
TRACELOG=/var/spool/audix/tracelog
TRACECMD=s 60 -o /var/spool/audix/tracelog.a -
o/var/spool/audix/tracelog.b
TRACEOUTPUT=/dev/null
Save output to Trace process
OLDTRACELOG=/var/spool/audix/oldtrace
19. [1 min]
After the
the screen, press
7-20
Issue 2 December 1996
OLDTRACELOG=/var/spool/audix/oldtrace
to clear the screen and get the login prompt.
RETURN
when ready. When the yellow
RETURN
.
RETURN
message appears on