Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 57

Task 10: Finalize and Test the Hardware
4. Check the alarm status.
a. With the cursor on the DEFINITY AUDIX system command line,
b. Check the ALARM TYPES fields for any active alarms (indicated by
c. Ignore the voice port alarms; however, resolve all other active
5. Place the labels supplied with the DEFINITY AUDIX system hardware as
follows:
a. Place the label containing the DEFINITY AUDIX system shutdown
b. Place the label with fan/filter cleaning information on the inside of
enter display alarms.
The system displays the Display Alarms screen.
a "y" next to the alarm type). Press
alarms.
You should see a voice ports major alarm and possibly port
warnings because the ports are not administered yet. These are the
only alarms that you should expect.
alarms. See DEFINITY AUDIX System — Maintenance ,
585-300-110, for the procedures for identifying and resolving the
alarms.
warning next to the cabinet Power switch.
the switch cabinet door.
(F3) to display the
ENTER
Issue 2 December 1996
2-35