Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 136

Upgrades to R3.2
Copyright (c) 1984, 1986, 1987, 1988, 1989, 1990, 1991 AT&T
Copyright (c) 1987, 1988 Microsoft Corp.
All Rights Reserved
DEFINITY(R) AUDIX(R) System
Copyright (c) 1991,1992,1993 Lucent Technologies
All Rights Reserved.
The system is coming up. Please wait.
WARNING: Firmware verification/reprogramming in progress.
Do not interrupt until completed.
Firmware verification/reprogramming completed successfully.
MFB state set to 35
Welcome to DEFINITY(R) AUDIX(R) System Release 3.2, Issue 1
Installation and Recovery — Copyright (c) 1992,1993 Lucent
Technologies
In the following steps, you may be prompted for selections from
menus to supply further information. Type either the menu number or
name, and a carriage return.
Do you wish to
1) shutdown
2) install
3) upgrade
4) recover
?
!
WARNING:
In the next step do not press 2 (the install option); this will destroy all
existing customer data.
16. [2 min]
When the menu appears, enter 3 to select the upgrade option. When the
prompt for a backup tape is displayed, insert the first of the two blank
backup tapes that came with the upgrade instructions.
? 3
Recovering system information.
Please insert the first backup tape. Press <return> when ready:
Checking announcement files for modification in the background.\
If, after pressing
retensioning process. Wait 5 to10 seconds and press
correct the problem.
!
WARNING:
Do not insert the automated backup tapes or the generic tape at this
point. The utility will overwrite all existing data on those tapes if you
do.
7-18
Issue 2 December 1996
, nothing happens, the tape may be in the
RETURN
again to
RETURN