Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 110

Acceptance Checks
The system responds with the Tape Test Results screen.
3. Press the
to 5 minutes to complete. If it does not complete successfully, refer to
DEFINITY AUDIX System — Maintenance , 585-300-110. If it does pass,
proceed to Task 24: Test Local Area Network, if:
Otherwise, go to Task 25: Clear Administration, Error, and Alarm Logs.
4-14
Issue 2 December 1996
(F3) function key to begin the test. The test takes from 3
ENTER
AUDIX server hardware options have been purchased (Task 13:
Activate DEFINITY AUDIX Server Hardware Options)
The DEFINITY AUDIX system has been upgraded with a TN2170
Alarm Board and a three-way splitter cable (See Upgrade
Instructions, Chapter 7, ''Upgrades to R3.2'' , and Task 6: Connect
the Alarm Board Cable, respectively.)
IMAPI system parameters have been activated (Task 13: Activate
DEFINITY AUDIX Server Hardware Options).