Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 144

Upgrades to R3.2
14. Move the cursor to the LAN IP Address field, and enter the number
assigned to the AUDIX server by the LAN administrator.
The site-specific address is expressed as nnn.nnn.nnn.nnn , each nnn
representing a decimal integer between 1 and 126, or 128 and 254.
15. Move the cursor to the LAN Subnet Mask field, and enter the Subnet Mask
for your network. The LAN administrator has this data.
16. Move the cursor to the Default LAN Gateway IP Address field, and enter
the LAN IP Address supplied by the LAN administrator.
This is the LAN server address to which all unknown addresses will be
sent for resolution.
17. Press the
address, subnet mask, and gateway IP address fields only take effect
after the AUDIX system has been rebooted. Rebooting is done later.)
18. Ensure that the IMAPI Access field for I
IMAPI Voice File Transfer field for a personal folder are set to y.
19. With the cursor on the DEFINITY AUDIX command line, enter reset
system reboot.
The system displays the Reset System Reboot screen
20. Press the
10 minutes for the DEFINITY AUDIX system to come up to the AUDIX state
the screen will display
7-26
Issue 2 December 1996
(F3) function key to save the changes. (Changes in the IP
ENTER
(F3) function key to begin the reboot. Wait approximately
ENTER
OLDTRACELOG=/var/spool/audix/oldtrace
Message Manager and the
NTUITY