Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 134

Upgrades to R3.2
7. [1 min.]
Invoke command mode by pressing
responds with information on the screen similar to what follows:
MFB 386FW Version: AU00S3EC
Local Console: Output ON, Input ON
Remote Maintenance Console: INACTIVE
command menu:?
8. Press
below is displayed.
command menu: ?
1 = Display Init History
2 = Display Status
3 = Read/Write Functions
4 = Additional Tests
5 = Auto Boot
6 = Preempt Auto Boot
7 = Manual Boot
8 = Board Commands
q = Quit and Auto Boot
command menu:
9. Enter 6 to Preempt Auto Boot .
Auto Boot Preempted
10. Insert the new release generic tape.
11. [1 min]
From the command menu, enter 7 to select the Manual Boot option. The
system will respond with information on the screen similar to what follows:
command menu: 7
Auto Boot Preempted
Enter Tape Device (0-6) (Default = 1):
12. Enter 2 for Boot from Tape.
13. Enter 1 for device number for the tape.
NOTE:
2 to 3 minutes may elapse before the following message appears.
MFB Board Diagnostics PASSED
Transferring To Software
0: Exit
1: Initialize Disk
2: Modify Partition Map
3: Copy Generic Partitions
4: Additional Commands
Enter option:
7-16
Issue 2 December 1996
to list available commands. A menu similar to that
SHIFT ? ENTER
Copyright (c) 1992 Lucent Technologies
All Rights Reserved
- . The system
CONTROL C C