Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 100

Acceptance Checks
5. Press
Maintenance screen
If Worksheet C-10 Set Up Alarm Origination , indicates that alarm origination is to be
activated through the switch only, enter n in the Alarm Origination Active? field. If
either audix only, or audix & switch, is indicated on Worksheet C-10, enter y in the
Alarm Origination Active? field.
6. Ask the INADS personnel to login and display the System-Parameters Maintenance
screen. The following steps should be completed by INADS personnel
a. INADS checks that the login is successful.
b. INADS checks that the Product Identification Number on the
c. INADS enters the test alarm-origination command, terminates login, and
d. INADS checks the appropriate trouble ticket. The trouble ticket should show
e. INADS makes a second call and login to the DEFINITY AUDIX system and
f. INADS terminates login and hangs up.
4-4
Issue 2 December 1996
(F7) to display the second page of System-Parameters
NEXTPAGE
.
System-Parameters Maintenance screen is correct
hangs up.
INADS, n, MINOR in the description field to indicate that a minor off-board
alarm was reported to INADS. There may be additional text in the
description field if other resolved alarms were reported.
checks the error log to verify that there are no problems.
:
.