Lucent Technologies DEFINITY AUDIX Installation And Upgrade page 125

Upgrade Checklist
Task
Change voice ports from
DS digital to CL digital.
NOTE:
Only G3V4 and updated
G3V2 and G3V3 support
enhanced Call transfer if
using digital port emulation
and Control Link integration.
The transfer is invoked via a
message from the AUDIX
system to the switch on the
control link.
Increase voice ports while
changing from digital to
analog emulation.
9. Administer networking
ports, if necessary.
10. Change machine
networking type from AMIS
to digital, if necessary.
11. Install, administer, and test
Message Manager, if
necessary.
12. Install additional language
sets.
13. Check .cust directory for
customized fragments and
announcements (remote
services group only).
Comments
Necessary if the customer
wants digital networking,
but also wants the features
supported by CL
integration (such as DCS,
enhanced call transfer, and
leave word calling).
Necessary if System 75 or
G1 switch and customer
simply wants more ports
and does not want digital
networking.
Necessary if the customer
wants digital networking.
Necessary if the customer
wants to use digital
networking and discontinue
AMIS networking.
Necessary if the customer
wants Message Manager
support, but does not
already have it.
Necessary if the customer
already has multiple
language sets.
Necessary if the customer
has reusable custom
recorded fragments.
Where Task is Described
Appendix A in Switch
Administration for the
DEFINITY AUDIX System
(585-300-509)
Appendix A in Switch
Administration for the
DEFINITY AUDIX System
(585-300-509)
Chapter 9 in DEFINITY
AUDIX Digital Networking
(585-300-534)
This chapter in section
Changing from AMIS to
Digital Networking
This chapter in section
Installing, Administering,
and Testing I
NTUITY
Message Manager
Announcement Set
Considerations and
Installation
This chapter in section
Customized
Announcement and
Fragment Considerations
Issue 2 December 1996
7-7