Task 15: Activate Parameters And Basic Features - Lucent Technologies DEFINITY AUDIX Installation And Upgrade

Initial System Administration
Task 15: Activate Parameters and Basic
Features
This task is required if the customer has indicated specific features to be
activated. Check Worksheet C-6, Activate Parameters and Basic Features to see
if any features are to be activated. If no features are to be activated, skip to Task
16: Add Tape. Otherwise, perform the following steps.
1. With the cursor on the DEFINITY AUDIX command line, type change
system-parameters features and press
The system displays the System-Parameters Features screen
2. Move the cursor to any of the fields to be changed on the first page and,
using the information on Worksheet C-7, Activate Parameters and Basic
Features , type the values specified.
3-30
Issue 2 December 1996
.
RETURN
.