Set Station Flow Rates Manually - Rain Bird ESP-LXME Installation, Programming & Operation Manual

Set Station Flow Rates Manually

Flow rates for each station can be entered manually.
b b
NOTE: If the optional FSM-LXME Flow Smart Module is installed
then flow can be learned automatically. This is the easiest, most
accurate method to enter flow readings. See Learn Flow section
for more details.
g b
Turn the controller dial to Advanced Settings.
A
The Advanced Settings screen appears with Watering Day Cycles
selected. Press the Down Arrow button to select FloManager;
then press Next.
B
The FloManager screen appears with FloManager On/Off selected.
Use the Down arrow to select Station Flow Rates; then press Next.
1 2
C
The Station Flow Rates screen appears. Press the + and - buttons
on the left to select the desired station number.
D
Press the + and - buttons on the right to enter the Flow Rate for
the selected station.
l Press and HOLD buttons to accelerate settings for Flow Rate. b
3
e b
Repeat this process to manually set up Flow Rates for additional
stations as desired.
4
ESP-LXME Controller 55