Setting Up; Arrangement - Christie APS Series User Manual

Setting up

Install the projector according to the
environment and manner the projector will be
used in.
This projector will perform in a free tilt
angle, as shown in the figures below.
For the case of installation in a special
state such as ceiling mount, the specified
mounting accessories and service may be
required. Before installing the projector,
consult your dealer about your installation.
Horizontal 360°

Arrangement

Refer to table T-1 in the end of Setup Guide to determine the screen size and
projection distance.
The values shown in the table are calculated for a full size screen.
a Screen size (diagonal)
b Projection distance (±10%, from the projector's end)
c1 , c2 Screen height (±10%)
NOTE
• The screen position may shift after installation if the projector is
suspended from the ceiling or other location due to the flexibility of the plastic
projector body. If readjustment is necessary, consult with your dealer or service
personnel.
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
Vertical 360°
7
Setting up
Tilt 360°
(combination of
horizontal and vertical)
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series