Using The Magnify Feature - Christie APS Series User Manual

Operating

Using the magnify feature

1.
Press the MAGNIFY ON button on the remote control.
The picture will be magnified, and the MAGNIFY
dialog will appear on the screen. When the MAGNIFY
ON button is pressed for the first time after the
projector is turned on, the picture will be zoomed by
1.5 times. On the dialog, triangle marks to show each
direction will be displayed.
2.
The display magnification of the projector switches in order
with every press of the MAGNIFY ON button.
1.5 times  2 times  3 times  4 times  1 time
3.
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor
buttons to shift the magnifying area.
4.
Press the MAGNIFY OFF button on the remote control to exit magnification.
● The MAGNIFY dialog will automatically disappear in several seconds with no
operation. The dialog will appear again if the MAGNIFY ON button is pressed
when the dialog has automatically disappeared.
● The magnification is automatically disabled when the displaying signal or its
display condition is changed.
● While the magnification is active, the keystone distortion condition may vary.
It will be restored when the magnification is disabled.
● Some horizontal stripes might be visible on the image while magnification is
active.
● This function is not available in the following cases:
- A sync signal in the range which is not supported is input.
- There is no input signal.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
34
MYBUTTON
INPUT
1 2
ASPECT PbyP AUTO
MAGNIFY FOCUS ZOOM
+
ON
MAGNIFY
MYBUTTON
INPUT 1 2
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
+ + +
ON ON/OFF
OFF - - -
PAGE
button
UP GEOMETRY PICTURE MUTE
-
OFF
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
PAGE
OSD MSG RESET
UP GEOMETRY PICTURE
DOWN INTERACTIVE NETWORK
ESC
ENTER
OSD MSG
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series
FREEZE
VOLUME
+ +
- -
MUTE
BLANK
MENU
RESET