Christie APS Series User Manual page 83

Item
SERVICE
(continued)
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting (21).
1:NORMAL ó 2:HIGH
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON ó OFF
If the remote control does not function correctly, disable either of
them.
It is not possible to disable both options at the same time.
Selecting this item displays COMMUNICATION
menu.
In this menu, you can configure the serial
communication settings of the projector using the
CONTROL port.
COMMUNICATION
• Select an item using the cursor buttons ▲/▼.
Then pressing the ► button opens the submenu
for the setting item you selected. Or, pressing
the ◄ button instead of the ► button makes the
menu back to the previous one without changing
the setup. Each submenu can be operated as
described above.
• For the function of serial communication, refer
to the Network Guide.
Description
81
OPTION menu
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series