Christie APS Series User Manual page 113

Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Schedule function
does not work.
When the
projector is
connected to
wired LAN, it
powers off and
on as described
below.
Powers off
POWER/STATUS
indicator blinks in
orange a few times
Goes into
standby mode
NOTE
• Although bright spots or dark spots may appear on the screen, this
is a unique characteristic of liquid crystal displays, and it does not constitute or
imply a machine defect.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
Cases not involving a machine defect
The
POWER SAVE/NETWORK-WOL
working.
Select NORMAL or QUICK START for STANDBY MODE
item in the SETUP menu.
The internal clock has been reset.
When you do not install the battery, once you turn off the
projector in the POWER SAVE/NETWORK-WOL mode
or the AC power, the current date and time setting is
reset. Check the DATE AND TIME setting in OPTION-
SCHEDULE.
Disconnect the LAN cable and check that the projector
is working properly.
If this phenomenon occurs after connecting to the network,
there may be a loop between two Ethernet switching hubs
within the network, as explained below.
- There are two or more Ethernet switching hubs in a network.
- Two of the hubs are doubly connected by LAN cables.
- This double connection forms a loop between the two hubs.
Such a loop may have an adverse effect on the projector
as well as the other network devices.
Check the network connection and remove the loop by
disconnecting the LAN cables such that there is only one
connecting cable between two hubs.
function is
111
Troubleshooting
Reference
page
61
–
–
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series