Power on/off
Power on/off
Turning on the power
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
2.
Make sure that the POWER/STATUS
indicator is lighted in steady orange
(100). Then remove the lens cover.
3.
Press the STANDBY/ON button on the projector
or the remote control.
The projection light source will light up, and the
POWER/STATUS indicator will begin blinking
green. When the power is completely on, the
indicator will stop blinking and light in steady
green (100).
To display the picture, select an input signal according
to the section Selecting an input signal (25).
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
POWER/STATUS
STANDBY/ON
22
indicator
button
MYBUTTON
INPUT
1
2
ASPECT
PbyP
AUTO
FREEZE
STANDBY/ON
button
MAGNIFY
FOCUS
ZOOM
VOLUME
+
+
+
ON
-
-
-
OFF
PAGE
UP
GEOMETRY
PICTURE
MUTE
INTERACTIVE
NETWORK
BLANK
DOWN
ESC
MENU
ENTER
OSD MSG
RESET
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series