Christie APS Series User Manual page 68

MENU PREFERENCES
Item
START UP
My Screen
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
My Screen ó ORIGINAL ó OFF
My Screen : Screen can be registered by the My Screen item
(66).
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the My Screen or ORIGINAL
screen will change to the AUTO BLANK screen (65) after several
minutes.
• When the ON is selected to the My Screen PASSWORD item in
the SECURITY menu (87), the START UP is fixed to My Screen.
This item allows you to capture an image for use as a My Screen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
Selecting this item displays a dialog
titled "My Screen". It will ask you if
you start capturing an image from the
current screen.
Please wait for the target image to be displayed, and press the
ENTER or button to start registration.
To restore the screen and return to the
previous dialog, press the RESET button
on the remote control.
Registration may take several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
"My Screen registration is finished."
If the registration failed, the following message is displayed:
"A capturing error has occurred. Please try again."
• This function cannot be selected when the ON is selected to the
My Screen Lock item (67).
• This function cannot be selected when the ON is selected to the
My Screen PASSWORD item in SECURITY menu (87).
• This function is unavailable for a signal from the LAN, HDMI 1,
HDMI 2 or HDBaseT port.
Description
66
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series