Christie APS Series User Manual page 35

Correcting the distortion (continued)
1.
Select SETUP with the ▲/▼ buttons and press the ► or ENTER button.
2.
Select one of the corners or sides to be adjusted with the ▲/▼/◄/►
buttons and press the ENTER or
3.
Adjust the selected part as below.
● For adjusting a corner, use the ▲/▼/◄/► buttons to adjust the position of
the corner.
● For adjusting the upper or lower side, use the ▲/▼ buttons to adjust the
distortion of the side.
● For adjusting the left or right side, use the ◄/► buttons to adjust the
distortion of the side.
● To adjust another corner or side, press the ENTER or
the procedure from step 2.
4.
This projector is equipped with a memory feature for 3D KEYSTONE
adjustment. Up to 3 sets of adjustments can be stored.
● SAVE:
To store the current 3D KEYSTONE adjustment, select one of the "SAVE"
options numbered 1 to 3 (number of the memory) with the ▲/▼ buttons and
press the ►, ENTER or
The current data being stored are lost by saving new data.
● LOAD:
To recall stored adjustments, select one of the "LOAD" options numbered
1 to 3 (number of the memory) with the ▲/▼ buttons and press the ►,
ENTER or
The current adjusted condition is lost by loading data. If you want to keep
the current adjustment, save it before performing a LOAD function.
NOTE
• The LOAD functions whose linked memories have no data are
skipped.
• There may be some noise and the screen may flicker for a moment when
loading data. This is not malfunction.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
button.
button.
button.
33
Operating
button and follow
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series