Christie APS Series User Manual page 65

Item
OSD MESSAGE
STANDBY
OUTPUT
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
Using the ▲/▼ buttons turns on/off the message function.
ON OFF
ó
■ON : OSD message is displayed normally.
■OFF : The following message functions do not work.
"AUTO IN PROGRESS" while automatically adjusting.
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"INVALID SCAN FREQ."
"NOT AVAILABLE"
"Searching...." while searching for the input.
"Detecting...." while an input signal is detected.
The indication of the input signal displayed by changing.
The indication of the aspect ratio displayed by changing.
The indication of the PICTURE MODE displayed by changing.
The indication of the MY MEMORY displayed by changing.
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
The indication of the LIGHT OUTPUT displayed by changing.
■HIDE : All message functions do not work.
The available buttons are as follows.
STANDBY, ON
* Use the OSD MSG button on the remote control to exit HIDE (6).
AUDIO OUT
To select the sound output in the standby mode.
•When the STANDBY MODE is set to NETWORK-WOL or POWER
SAVE, the STANDBY OUTPUT menu cannot be operated.
Description
HIDE
ó
63
SETUP menu
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series