Christie APS Series User Manual page 104

Troubleshooting
Regarding the indicator lamps (continued)
POWER/STATUS
indicator
Blinking
In Red
9 times
Blinking
In Red
9 times
Normally lighting in
Orange.
Blinking In Green
times for approx. 3
seconds.
Blinking In Green
approx. 3 seconds.
Lighting
In
Green
Lighting
In
Orange
Normally lighting in
Green.
Blinking 1 time for
approx. 3 seconds.
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
STATUS
DETAIL
indicator
There is a possibility that the interior portion
Blinking
has become overcooled.
Please use the unit within the usage temperature
In Red
parameters (0°C to 40°C).
1 ～ 4 times
After the treatment, turn the power on.
Blinking
The illuminance system is operating in degraded
In Red mode.
5 ～ 7 times The image color may not be projected correctly.
STANDBY MODE is set to QUICK START.
Refer to STANDBY MODE. (61)
Turned
2
off
At least 1 "Power ON" schedule is saved to the
Turned
for projector.
Please refer to Schedule Settings section of
off
User's Manual - Network Guide.
The projector received the remote control signal
Blinking
when ALL is selected for REMOTE CONTROL in
In Red KEY LOCK.
CONTROL PANEL was operated when ALL is
1 time
selected for CONTROL PANEL in KEY LOCK.
PIN LOCK or TRANSITION DETECTOR function
is active.
Please see SECURITY menu > PIN LOCK or
Blinking In
TRANSITION DETECTOR(88, 89)
Red 1 time
If the same indication is displayed after the remedy,
please contact your dealer or service company.
Blank(black) or AV Mute(black) is on.
Turned
Press any button on the remote control or on the
off
control panel to disable Blank or AV Mute.
Description
102
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series