Christie APS Series User Manual page 18

Setting up
Connecting with your devices (continued)
Fastening the cable
Use the supplied cable tie to fasten the cables.
Remove the screw located on the lower side of
HDMI connector and use it to attach the HDMI
cable holder.
It is recommended to fasten the HDMI cables by using the HDMI cable holder and
the Cable tie to prevent them from coming off. Use a Cable tie with the size of 2.0
x 4.0mm or smaller.
No cable tie
HDMI cable holder
WARNING
CAUTION
with the size of 2.0 x 4.0mm or smaller.
cables and tie holder.
►Do not bind the cables too tightly. The cables or the hole might be damaged.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
►Do not fasten the cables other than HDMI.
►To fasten the cable, use a supplied Cable tie or plastic tie
With cable tie
Cable tie - medium
A metallic tie may cause damage to the
16
HDMI
HDMI
screw
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series