Turning Off The Power - Christie APS Series User Manual

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The light source will go off, and the POWER/STATUS indicator will begin
blinking in orange. Then the POWER/STATUS indicator will stop blinking and
light in steady orange when the light source cooling is complete (100).
3.
Attach the lens cover, after the POWER/STATUS indicator turns to steady
orange.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings since the projection ray may cause a trouble on
your eyes.
►Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in fire or smoke.
►Do not touch around the exhaust vents during use or just after use, since it is
too hot.
NOTE
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn
on/off. Please refer to the DIRECT POWER ON (71), AUTO POWER ON
(71) and AUTO POWER OFF (72) items of the OPTION menu.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
►A strong light is emitted when the projector's power is on.
23
Power on/off
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series