Adjusting The Projector's Elevator - Christie APS Series User Manual

Adjusting the projector's elevator

Lengthening or shortening each elevator foot
shifts the projection position and the projection
angle.
Turn the elevator foot to adjust its length.
When the place to put the projector is slightly
uneven to the left or right, use the rear elevator
feet to place the projector horizontally.
Spacers are installed on each rear elevator feet
at the time of shipment, and the projector is
ready for use as it is.
If necessary, detach the spacer, and the elevator
foot can be manually twisted to make more
precise adjustments.
WARNING ►Do not lengthen the
lengthened exceeding the limit may come off and drop
result in an injury or damaging the projector.
►Keep the spacer away from children and pets. Be careful not to let
them swallow the spacer. If swallowed consult a physician immediately for
emergency treatment.
NOTE • You can attach the spacers to set the projector back to the factory
default after adjusting the foot. If you install the projector in a different place in
the future, it is recommended to keep the spacers and reuse them.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
max.
Spacer
elevator foot exceeding 25 mm. The foot
the projector down, and
27
Operating
Front foot
25 mm
Rear feet
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series