Christie APS Series User Manual page 96

Maintenance
Cleaning and replacing the air filter (continued)
WARNING
not plugged in, then allow the projector to cool sufficiently. Taking care of the air
filter in a high temperature state of the projector could cause an electric shock, a
burn or malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector without the
air filter or the filter cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.
NOTE
• Replace the air filter when it is damaged or heavily soiled.
• Reset the filter hours only when you have cleaned or replaced the air filter, for
a suitable indication about the air filter.
• The projector may display the message such as "CHECK THE AIR FLOW" or
turn off the projector, to prevent the internal heat level rising.
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
►Before taking care of the air filter, make sure the power cord is
94
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series