Christie APS Series User Manual page 52

SIZE AND POSITION menu
Item
V POSITION
H POSITION
H PHASE
(continued on next page)
LWU650-APS/LWU530-APS
User's Manual - Operating Guide
Using the ◄/► buttons adjusts the vertical position.
Down ó Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (49) setting. It is not
possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the LAN, HDMI 1,
HDMI 2 or HDBaseT port.
Using the ◄/► buttons adjusts the horizontal position.
Right ó Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (49) setting. It is not
possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the LAN, HDMI 1,
HDMI 2 or HDBaseT port.
Using the ◄/► buttons adjusts the horizontal phase to eliminate
flicker.
Right ó Left
• This item can be selected only for a computer signal or a component
video signal. This function is unavailable for a signal from the LAN,
HDMI 1, HDMI 2 or HDBaseT port.
Description
50
020-001523-01 Rev. 1 (11-2018)
LIT MAN USR APS Series