Installing The Batteries; Turning On The Power - Christie Q Series Quick Setup Manual

8 Installing the batteries

Insert the batteries into the remote control before using it.
(Batteries are not included.)
1

9 Turning on the power

Make sure that the power cord is firmly and correctly connected to the
1.
projector and the outlet.
Make sure that the POWER indicator is lighted in steady orange.
2.
Press STANDBY/ON button on the projector or the ON button on the remote
3.
control.
The projection lamp will light up and POWER indicator will begin blinking in green.
When the power is completely on, the indicator will stop blinking and light in
steady green.
DWU1052/DHD1052
Quick Setup Guide
2
ON button
STANDBY/ON
button
5
3
POWER
indicator
020-000860-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052 CON