Power On/Off; Turning On The Power; Turning Off The Power - Christie LWU701i Operating Manual

Power on/off

Turning on the power

1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
2.
Make sure that the POWER indicator is
lighted in steady orange (117). Then
remove the lens cover.
3.
Press STANDBY/ON button on the projector
or the ON button on the remote control.
The projection lamp lights up and the POWER indicator begins blinking in
green. When the power is completely on, the indicator stops blinking and light
in a steady green (117).
To display the picture, select an input signal according to the section Selecting an
input signal (38).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message "Power off?" appears on the screen for about five seconds.
2.
Press the STANDBY/ON or STANDBY button again while the message
appears.
The projector lamp goes off, and the POWER indicator begins blinking in
orange. The POWER indicator stops blinking and lights in a steady orange
when the lamp cooling is complete (117).
3.
Attach the lens cover, after the POWER indicator turns to steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Do not turn the projector off shortly after turning it on. Such operations might cause
the lamp to malfunction or shorten the lifetime of some parts including the lamp.
(continued on next page)
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
POWER indicator
SHUTTER
35
Power on/off
STANDBY button
ON button
STANDBY/ON button
020-000786-02
LIT MAN USR D2