Turning On The Power - Christie LW751i Setup Manual

Turning on the power

Make sure that the power cord is firmly and correctly connected to the
1.
projector and the outlet.
2. Make sure that the POWER indicator is
lighted in steady orange. Then remove
the lens cover.
3.
Press the STANDBY/ON button on the
projector or the ON button on the remote
control.
The projection lamp lights up and the
POWER indicator begins blinking in green.
When the power is completely on, the
indicator stops blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings, since the projection ray may cause a trouble on
your eyes.
►Blocking the beam can cause high temperatures to occur and may result in
smoke or fire.
NOTE • Power on the projector prior to any connected devices.
• The projector has the DIRECT POWER ON function, which makes the
projector automatically turn on. For more information, see User's Manual -
Operating Guide.
http://www.pureglare.com.au
LWU701i/LW751i/LX801i/LWU601i/LW651i
Setup Guide
13
POWER indicator
ON button
STANDBY/ON button
020-000792-02
LIT GUID SET D2