FusionServer Pro 2288H V5 Server
User Guide
7.4.2 Configuration Overview
Configuration Process
Figure 7-26 Initial configuration process
Table 7-5 Process description
Step
Change the initial
passwords.
Check the server.
Set the iBMC IP
address.
Configure RAID
settings.
Configure BIOS
settings.
Install the OS.
Issue 08 (2019-10-30)
Description
l Initial password of the default iBMC user
l Initial iBMC U-Boot password
l Ensure that the server version meets site requirements.
l Ensure that no alarm is generated for the server.
Set an iBMC IP address for the server.
Configure the RAID array based on service requirements.
Configure the BIOS settings of the server, including the boot
mode, NIC PXE function, and BIOS password.
Install an OS for the server.
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
102