Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
Indicator
UID indicator
Connection status
indicator for a GE
electrical port
Data transmission status
indicator for a GE
electrical port
Connection status
indicator/Data
transmission status
indicator for a 10GE
electrical port
Data transmission rate
indicator for a 10GE
electrical port
Connection status
indicator/Data
transmission status
indicator for a 10GE
optical port
Data transmission rate
indicator for a 10GE
optical port
Issue 08 (2019-10-30)
Description
The UID indicator helps identify and locate a device.
l Off: The device is not being located.
l Blinking blue: The device has been located and is
differentiated from other devices that have also been
located.
l Steady blue: The device is being located.
NOTE
You can turn on or off the UID indicator by pressing the UID button or
remotely running a command on the iBMC CLI.
l Off: The network port is not connected.
l Steady green: The network port is properly connected.
l Off: The network port is not connected.
l Steady yellow: The network port is in active status.
l Blinking yellow: Data is being transmitted.
l Off: The network port is not connected.
l Blinking green: Data is being transmitted.
l Steady green: The network port is properly connected.
l Off: The network port is not connected.
l Steady green: The data transmission rate is 10 Gbit/s.
l Steady yellow: The data transmission rate is 1 Gbit/s.
l Off: The network port is not connected.
l Blinking green: Data is being transmitted.
l Steady green: The network port is properly connected.
l Off: The network port is not connected.
l Steady green: The data transmission rate is 10 Gbit/s.
l Steady yellow: The data transmission rate of the link is
lower than 10 Gbit/s.
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Description
16
Advertisement
Table of Contents
