Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
7.3.2 Power-Off Procedure
The server can be powered off in any of the following ways:
l
l
l
l
l
l
Issue 08 (2019-10-30)
l Powering off a server will interrupt all services and programs running on it. Therefore, before
powering off a server, ensure that all services and programs have been stopped or migrated to other
servers.
l The "power-off" mentioned here is an operation performed to change the server to the standby state
(the power indicator is steady yellow).
l After a server is powered off forcibly, wait for more than 10 seconds for the server to power off
completely. Do not power on the server again before it is completely powered off.
l Forced power-off may damage user programs or unsaved data. Exercise caution when performing
this operation.
Connect a keyboard, video, and mouse (KVM) to the server and shut down the operating
system of the server using the KVM.
When the server is in power-on state, pressing the power button on the server front panel
can power off the server gracefully.
If the server OS is running, shut down the OS according to the onscreen instructions.
For details, see
2.1.2 Indicators and
When the server is in power-on state, holding down the power button on the server front
panel for six seconds can power off the server forcibly.
For details, see
2.1.2 Indicators and
Use the iBMC WebUI.
a.
Log in to the iBMC WebUI.
For details, see
9.2 Logging In to the iBMC
b.
Choose Power > Power Control.
The Power Control page is displayed.
c.
Click Power Off or Forced Power Off.
A confirmation message is displayed.
d.
Click Yes.
Use the iBMC CLI.
a.
Log in to the iBMC CLI.
For details, see
9.4 Logging In to the
b.
Run the following command:
To power off the server gracefully, run the ipmcset -d powerstate -v 0
n
command.
To power off the server forcibly, run the ipmcset -d powerstate -v 2
n
command.
c.
Type y or Y and press Enter.
Use the Remote Virtual Console.
a.
Log in to the Remote Virtual Console.
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
Buttons.
Buttons.
WebUI.
CLI.
100
Advertisement
Table of Contents
