Enabling Vmd; Disabling Vmd - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide
l
l
l

9.5.1 Enabling VMD

Procedure
Step 1 Access the BIOS interface.
Step 2 Choose Advanced.
Step 3 Select Socket Configuration and press Enter.
Step 4 Select IIO Configuration and press Enter.
Step 5 Select Intel(R) VMD Technology and press Enter.
Step 6 Select Intel(R) VMD Config and press Enter.
Step 7 Select Auto and press Enter.
Step 8 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 9 Select Yes and press Enter.
The server automatically restarts for the settings to take effect.
----End

9.5.2 Disabling VMD

Procedure
Step 1 Access the BIOS interface.
Step 2 Choose Advanced.
Step 3 Select Socket Configuration and press Enter.
Step 4 Select IIO Configuration and press Enter.
Step 5 Select Intel(R) VMD Technology and press Enter.
Step 6 Select Intel(R) VMD Config and press Enter.
Step 7 Select Disabled and press Enter.
Step 8 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 9 Select Yes and press Enter.
Issue 08 (2019-10-30)
The VMD function must be enabled on the BIOS in UEFI mode only. The BIOS in
legacy mode does not support this setting.
Use Intelligent Computing Compatibility Checker
operating systems supported by the VMD function.
If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
to obtain information about the
135