Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
6.1 Preventing Electrostatic Discharge
6.2 Grounding Methods to Prevent Electrostatic Discharge
6.1 Preventing Electrostatic Discharge
The static electricity on fingers or other electrical conductors may damage the mainboard or
other electrostatic-sensitive devices and shorten the product life.
To minimize ESD damage, observe the following precautions:
l
l
l
l
l
l
l
l
l
6.2 Grounding Methods to Prevent Electrostatic Discharge
Use one or more of the following grounding methods when handling or installing
electrostatic-sensitive components:
Issue 08 (2019-10-30)
Lay ESD floors or ESD cushions in the entire equipment room, and use ESD chairs. The
equipment room is equipped with ESD clapboards, ESD screens, and ESD curtains.
All floor-standing electric devices, metal frames, and metal chassis shells in the
equipment room must be directly grounded. All electric meters or tools on a workbench
must be connected to the common ground point of the workbench.
Monitor the temperature and humidity in the equipment room. The heating system
reduces indoor humidity and increases ESD.
Place unused products into ESD bags to prevent direct contact with humans during
transportation and storage.
Before products arrive at an ESD area, store them in their own packages.
Place the product package on a grounded surface before taking out the product.
Wear an ESD wrist strap when installing or removing a server component. Ensure that
the ground terminal of the ESD wrist strap is inserted into the ESD jack in the chassis.
During parts replacement, keep new server components in ESD bags before installation,
and place removed server components on ESD mats for temporary storage.
Do not touch pins, wires, or integrated circuits.
Copyright © Huawei Technologies Co., Ltd.
6 ESD
6
ESD
71
Advertisement
Table of Contents
