Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
2.
Step 5 Check whether the new cable is properly connected.
Power on the device. Check whether the communication with the peer device is normal by
running the ping command.
l
l
Step 6 If the peer device cannot be pinged, check whether the cable is intact or the connector is
securely connected.
Issue 08 (2019-10-30)
Figure 7-17 Removing an SFP+ cable
Connect the new SFP+ cable.
Remove the dust-proof cap on the port, and insert the cable connector into the port.
When you hear a "click" and the cable cannot be pulled out, the connector is secured.
Figure 7-18 Connecting an SFP+ cable
If yes, go to
Step
7.
If no, go to
Step
6.
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
91
Advertisement
Table of Contents
