Ports - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide
Silkscreen

2.1.3 Ports

Port Positions
l
Issue 08 (2019-10-30)
Indicator/
Button
Health status
indicator
NMI button
LOM port
connection
status indicator
8 x 2.5" drive configuration
Figure 2-11 Ports on the front panel
Copyright © Huawei Technologies Co., Ltd.
Description
l Blinking red at 1 Hz: A major alarm has been
generated on the system.
l Blinking red at 5 Hz: A critical alarm has been
generated on the system.
l Steady green: The device is operating properly.
A non-maskable interrupt (NMI) is generally
triggered to stop the OS for debugging. To trigger an
NMI, press this button or click the button on the
iBMC WebUI.
NOTICE
l Press the NMI button only when the OS is abnormal.
Do not press this button when the server is operating
properly. An NMI does not gracefully shut down the OS
and causes service interruption and data loss.
l Before pressing the NMI button, ensure that the OS has
the NMI processing program. Otherwise, the OS may
crash. Exercise caution when pressing this button.
Each indicator shows the connection status of an
Ethernet LOM port.
l Off: The network port is not in use or has failed.
l Steady green: The network port is properly
connected.
NOTE
l The indicators correspond to two 10GE and two GE
network ports on the mainboard.
l The LOM has a standby power supply and will not be
powered off after the service system is powered off. If
the network ports are properly connected to other
working network devices, the network ports will remain
connected and the indicators are on.
2 Hardware Description
11