Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
Category
Ports
Video card
System management
Issue 08 (2019-10-30)
Specifications
Supports a variety of ports.
l Ports on the front panel:
– Two USB 2.0 ports
– One USB 3.0 port
– One DB15 VGA port
NOTE
For the server that uses 12 x 3.5", 20 x 2.5" (8 x SAS/SATA + 12 x
NVMe) or 25 x 2.5" drive configuration, the front panel provides
only two USB 2.0 ports.
l Ports on the rear panel:
– Two USB 3.0 ports
– One DB15 VGA port
– One RJ45 serial port
– One RJ45 system management port
– Two GE electrical ports
– Two 10GE electrical ports or 10GE optical ports
l Built-in ports:
– One USB 3.0 port
– Two SATA ports
NOTE
l The front USB 3.0 ports are connected to the built-in USB 3.0 port
through USB signal cables. The built-in USB 3.0 port cannot be
used without a signal cable.
l Do not install the operating system on the USB device.
An SM750 video chip with 32 MB display memory is
integrated on the mainboard. The maximum display resolution
is 1920 x 1200 at 60 Hz with 16 M colors.
NOTE
l The integrated video card can provide the maximum display
resolution (1920 x 1200) only after the video card driver matching
the operating system version is installed. Otherwise, only the
default resolution supported by the operating system is provided.
l If the chassis provides the front and rear VGA ports but only one
VGA port is connected to a monitor, the display effect may be
affected.
l UEFI
l iBMC
l NC-SI
l Integration with third-party management systems
Copyright © Huawei Technologies Co., Ltd.
3 Product Specifications
62
Advertisement
Table of Contents
