Checking The Server - Huawei FusionServer Pro 2288H V5 User Manual

FusionServer Pro 2288H V5 Server
User Guide
Step 6 Switch to the interface for changing the U-Boot password.
passwd
The command output is as follows:
Enter old password:
Step 7 Enter the old password.
The command output is as follows:
Enter new password:
Step 8 Enter a new password.
The command output is as follows:
Enter the new password again:
Step 9 Enter the new password again.
If the command output is as follows, the password has been changed:
. done
Un-Protected 1 sectors
Erasing Flash...
. done
Erased 1 sectors
Writing to Flash... done
. done
Protected 1 sectors
password be changed successfully.
Step 10 Exit the U-Boot interface.
boot
----End

7.4.4 Checking the Server

Process
Check the server by performing the following operations:
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
106