Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
2.
Step 5 Check whether the new cable is properly connected.
Power on the device. If the LOM indicator is green, the cable is properly connected.
Step 6 Bind the new optical cable.
Issue 08 (2019-10-30)
Figure 7-19 Removing a cable (for an IB NIC with two 56 Gbit/s ports as an example)
Connect the new cable.
Remove the dust-proof cap on the port, and insert the cable connector into the port.
When you hear a "click" and the cable cannot be pulled out, the connector is secured.
Figure 7-20 Connecting a cable (for an IB NIC with two 56 Gbit/s ports as an example)
Copyright © Huawei Technologies Co., Ltd.
7 Installation and Configuration
93
Advertisement
Table of Contents
