Optional) Commissioning The Ibox And Ibat; Setting Ibox And Ibat Parameters - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
----End

9.3.2 (Optional) Commissioning the iBOX and iBAT

If the iBOX and iBAT are configured, perform the following steps to commission
them.

9.3.2.1 Setting iBOX and iBAT Parameters

Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Monitoring > Power Distribution > iBOX/CIM > Running Parameters.
Step 3 Click Unhide All Advanced Signals, set iBOX single battery qty., Batt.
installation time, Single battery capacity, Current source, and Battery string
No.. Retain default values for other parameters.
Table 9-7 Setting iBOX parameters
Parameter
iBOX/CIM single
battery qty.
Batt installation
time
Single battery
capacity
Current source
Issue 03 (2022-12-15)
NO TE
– After the first login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. The relevant party
will be liable for any security issues caused by your failure to change the preset
password in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
Description
Total number of batteries
monitored by the iBOX/CIM
Actual time at which batteries are
installed
Single battery capacity refers to the
capacity of a single battery in a
battery string managed by the
iBOX.
0–xxxA Hall
The actual specifications of the Hall
effect sensor prevail.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
Remarks
Set this parameter
based on the battery
parameter planned by
the customer.
-
Obtain the battery
capacity from the
battery label or
document.
-
75