Table of Contents
Advertisement
FusionServer Pro 2288H V5 Server
User Guide
Procedure
Step 1 Configure an IP address for the client (PC) to enable communication between the client and
the iBMC.
The IP address configured and the iBMC management network port IP address must be on the
same network segment.
Step 2 Double-click KVM.exe.
The Connect to iBMC dialog box is displayed.
Figure 9-5 Connect to iBMC
Step 3 Enter the network address, user name, and password.
Step 4 Select a login mode.
l
l
Step 5 Click Connect.
A security warning is displayed.
Issue 08 (2019-10-30)
l The network address can be in any of the following formats:
iBMC management network port IP address (IPv4 or IPv6 address):Port number
–
Enter an IPv6 address in brackets or an IPv4 address directly, for example, [2001::64]:444 or
192.168.100.1:444.
iBMC domain name address:Port number
–
l When the port number is the default port number 443, the port number can be left blank.
Shared Mode: allows two users to access and manage a server at the same time. Each
user can view the operations performed by the other user.
Private Mode: allows only one user to access and manage a server at a time.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
125
Advertisement
Table of Contents
