Configuration
Configuration during operation
If Fabius is in one of the ventilation modes, the
following configuration functions can be
performed:
– Calibration of the O
– Displaying and changing the monitoring
settings
– Changing configurations
1 Press the
(A) key.
Volume Control
The pressure waveform is no longer displayed.
144
sensor
2
A
B
C
The following softkeys (C) are displayed on the
screen, e.g., in Volume Control mode:
– VolumeAlarms ON/OFF
– Auto Set
– CalibrateO
Sensor
2
– DesComp ON/OFF
– AccessAlarm Log
– AccessAlarm Volume
If no change is made within 15 seconds, the
pressure waveform is displayed again.
Pressing the
key (B) will also cause the
pressure waveform window to be displayed again.
Instructions for use Fabius GS premium SW 3.n