Operating concept
Selecting and setting
Monitoring settings and system settings
Each of these settings requires a selection and
confirmation by pressing the rotary knob.
– To change a value or parameter or to navigate
in the menus, turn the rotary knob.
In this document, these procedural steps are
simply called "select."
– To confirm a value or a selection, press the
rotary knob.
Without confirmation with the rotary knob the value
or parameter is not changed. In this document,
these procedural steps are simply called "confirm."
Changing the ventilation mode
A
1 Select a ventilation mode (A).
– The LED in the key flashes.
– The pressure waveform is replaced by a
dialog window with ventilation settings.
– A message with further instructions (B) is
displayed.
2 Confirm the ventilation mode.
– The LED in the key is continuously lit up.
– The pressure waveform is displayed again.
46
B
Instructions for use Fabius GS premium SW 3.n