Assembly and preparation
Connecting the mains power supply
The mains voltage must correspond to the voltage
range indicated by the rating plate on the rear of
the device:
100 V to 240 V
WARNING
Risk of electric shock and device malfunction
If the device is connected to a power socket
with incorrect mains voltage or without a
protective ground, the user can be injured
and the device damaged.
Only connect the power cable to power
sockets with a protective ground, see
''Technical data''.
NOTE
The mains plug must be freely accessible so that
the power supply to Fabius can be quickly
interrupted in the event of device failure.
1 Connect the power cable with the device.
54
2 Plug the power cable into the mains power
socket on the wall.
LED
green.
3 Set On/Off switch (A) to position
4 Check the status bar for the battery indicator.
A
Instructions for use Fabius GS premium SW 3.n
on the front of the device lights up
.