Prepare The Ldap Corporate Directory Search; Configure Broadsoft Settings - Cisco 6800 Series Administration Manual

Prepare the LDAP Corporate Directory Search

Prepare the LDAP Corporate Directory Search
Procedure
Step 1 Click Admin Login > advanced > Voice > System.
Step 2
In the IPv4 Settings section, in the Primary DNS field, enter the IP address of the DNS server.
This step is required only if you are using Active Directory with authentication set to MD5.
Step 3
In the Optional Network Configuration section, in the Domain field, enter the LDAP domain.
This step is required only if you are using Active Directory with authentication set to MD5.
Some sites might not deploy DNS internally and instead use Active Directory 2003. In this case, it is not
necessary to enter a Primary DNS address and an LDAP Domain. However, with Active Directory 2003, the
authentication method is restricted to Simple.
Step 4 Click the Phone tab.
Step 5 In the LDAP section, use the LDAP Dir Enable drop-down list box to choose Yes.
This action enables LDAP and causes the name that is defined in the Corp Dir Name field to appear in the
phone directory.
Step 6 Configure the LDAP fields as described in
Step 7
Click Submit All Changes.

Configure BroadSoft Settings

The BroadSoft directory service enables users to search and view their personal, group, or enterprise contacts.
This application feature uses BroadSoft's Extended Services Interface (XSI).
To improve security, the phone firmware places access restrictions on the host server and directory name
entry fields.
The phone uses two types of XSI authentication methods:
• User login credentials: The phone uses the XSI user id and password.
• SIP credentials: The register name and password of the SIP account registered on the phone. For this
Procedure
Step 1 In the phone web page, navigate to Admin Login > advanced > Voice > Phone.
Step 2
In the XSI Service section, choose Yes from the Directory Enable drop down list box.
Step 3 Set up the fields as described in
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
198
method, the phone can use the XSI user ID along with the SIP authentication credentials for the
authentication.
XSI Phone Service, on page
LDAP, on page 271 .
268.
Phone Administration