Cisco 6800 Series Administration Manual page 252

SDP Payload Types
Parameter
SDP IP Preferences
SDP Payload Types
Parameter
G722.2 Dynamic Payload
iLBC Dynamic Payload
OPUS Dynamic Payload
AVT Dynamic Payload
INFOREQ Dynamic Payload
H264 BP0 Dynamic Payload
H264 HP Dynamic Payload
G711u Codec Name
G711a Codec Name
G729a Codec Name
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
238
Description
Select IPv4 or IPv6.
Default: IPv4
If the phone is in dual-mode and has both ipv4 and
ipv6 addresses, it will always include both addresses
in SDP by attributes "a=altc ...
If IPv4 address is selected, then ipv4 address has
higher priority than ipv6 address in SDP and indicates
that phone prefers using ipv4 RTP address.
If the phone has only ipv4 address or ipv6 address,
SDP does not have ALTC attributes and RTP address
is specified in "c=" line.
Description
G722 Dynamic Payload type.
Default: 96
iLBC Dynamic Payload type.
Default: 97
OPUS Dynamic Payload type.
Default: 99
AVT dynamic payload type. Ranges from 96-127.
Default: 101
INFOREQ Dynamic Payload type.
H264 BPO Dynamic Payload type.
Default: 110
H264 HP Dynamic Payload type.
Default: 110
G711u codec name used in SDP.
Default: PCMU
G711a codec name used in SDP.
Default: PCMA
G729a codec name used in SDP.
Default: G729a
Phone Troubleshooting