Cisco 6800 Series Administration Manual page 294

SIP Settings
Parameter
User Equal Phone
Call Recording Protocol
Privacy Header
P-Early-Media Support
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
280
Description
When a tel URL is converted to a SIP URL and the
phone number is represented by the user portion of
the URL, the SIP URL includes the optional :
user=phone parameter (RFC3261). For example:
To: sip:+12325551234@example.com; user=phone
To enable this optional parameter, select Yes.
Default: No
Determines the type of recording protocol that the
phone uses. Options are:
• SIPINFO
• SIPREC
Default: SIPREC
Sets user privacy in the SIP message in the trusted
network.
The privacy header options are:
• Disabled (default)
• none—The user requests that a privacy service
applies no privacy functions to this SIP message.
• header—The user needs a privacy service to
obscure headers which cannot be purged of
identifying information.
• session—The user requests that a privacy service
provide anonymity for the sessions.
• user—The user requests a privacy level only by
intermediaries.
• id—The user requests that the system substitute
an id that doesn't reveal the IP address or host
name.
Default: Disabled
Controls whether the P-Early-Media header is
included in the SIP message for an outgoing call.
To include the P-Early-Media header, select Yes.
Otherwise, select No.
Default: No
Phone Troubleshooting